WHAT'S NEW FROM WATSON-MARLOW BREDEL?

Introducing our new FAM 110/220VAC and FDM 12/24VDC drives that step up to the mark in demanding OEM applications.

Both new drives have a superior square 90mm full ball bearing spur gearbox. The gearbox can withstand a peak torque of 10Nm, and in conjunction with high quality motors give total reliability with a quiet and trouble free operation.

Together with two pumphead options: The high flow 520R provides superb chemical resistance whilst the gangable 313D pumpheads offer fast and easy set up for any operator combining to deliver OEM pumps that offer unsurpassed value for money.

FAM-drive for 220 and 110VAC

The 1-phase reversible induction motor delivers up to 40W and is capable to run a 520R2 pumphead up to 290/350rpm at 50/60Hz, for a flow rate up to 4,3/5,2 litres a minute with a 9,6mm ID tubing. For multi channel pumping up to six 313-pumpheads can be ganged depending on gear ratio. This IP54 drive is safe and easily connected to mains power through a terminal box on the motor.

FDM-drive for 12 and 24VDC

The FDM-drive has a 30W output permanent magnet DC-motor. It is a low speed, 1750rpm, motor with replaceable long life brushes, which makes it suitable for a wide range of applications. A robust, quiet and powerful DC-drive!

All pumps come mounted with a 150x130mm stainless steel face plate. For each type there are four different speeds to choose from.